dsfdsfdsf BOP & Parts-Xi'an Landrill Oil Tools Co.,Ltd

 

BLOWOUT PREVENTOR

 
Ram type BOP
Side outlets to 4-1/16”(7-1/16” on 26-3/4”BOPs) can be provided beneath each set of rams on either or both of U BOPs. Side outlets can be studded, open-face flange or clamp hub with the same pressure rating as the vertical run connections.
1.       Flanges confirm to API Spec 6A, 16C;                       valves, manifolds,BOP,pipeline, drilling, oilfield
2.       Hubs confirm to API Spec 6A or applicable standard;
3.       Type 6BX flanges with 1000 and 15000 Psi working pressure;
4.       13-5/8” and larger bore BOPs with 5000 Psi working pressure;
5.       Hydraulic control connections for operation of rams and bonnets are 1” NPT. There are two connections for each ram.
 
Bore (inches) 7-1/16" 9 13-5/8"
Working Pressure (psi) 5,000 10,000 3,000 5,000 3,000 10,000
Length (inches) 58-1/4" 79 60 79-1/8" 130-1/4" 128-3/4"
Width (inches) 21-1/2" 30 21-1/2" 23-1/16" 40-3/4" 43-1/16"
Height (inches), Single, Stud x Stud 15 22-7/8" 11-1/8" 14-1/2" 17-1/4" 28
Height (inches), Double, Stud x Stud 26-3/4" 36-5/8" 22 29-1/2" 34 46
Weight (lbs), 1,385 5,550 1,170 2,870 8,400 13,200
 Single, Stud x Stud
Weight (lbs), 2,504 9,900 2,200 5,750 15,350 23,400
 Double, Stud x Stud
Gallons to Open 1.18 2.34 0.68 2.27 4.46 10.52
Gallons to Close 1.45 2.72 0.77 2.58 5.44 10.58
Closing Ratio 5.45:1 7.11:1 4.5:1 5.57:1 5.54:1 7.11:1
 
Annular Blowout Preventor                                                                                                                     valves, manifolds,BOP,pipeline, drilling, oilfield
Annular BOP meets NACE and API Spec 6A requirements for internal H2S service. Low temperature service BOP is available. The special lightweight single spherical BOP is designed for airlifting to remote drilling site, can be disassembled into components no heavier than 4000 pound each be carried by helicopter.
Annular BOPs consists of five major parts: Upper and lower housing, sealing element, adapter ring and piston.
 
Bore (inches) 7-1/16" 9 13-5/8" 21-1/4"
Working Pressure (psi) 5,000 10,000 3,000 5,000 3,000 10,000 2,000
Length (inches) 58-1/4" 79 60 79-1/8" 130-1/4" 128-3/4" 127-1/2"
Width (inches) 21-1/2" 30 21-1/2" 23-1/16" 40-3/4" 43-1/16" 40-7/8"
Height (inches), Single, Stud x Stud 15 22-7/8" 11-1/8" 14-1/2" 17-1/4" 28 23-1/8"
Height (inches), Double, Stud x Stud 26-3/4" 36-5/8" 22 29-1/2" 34 46 44-7/16"
Weight (lbs), 1,385 5,550 1,170 2,870 8,400 13,200 7,285
 Single, Stud x Stud
Weight (lbs), 2,504 9,900 2,200 5,750 15,350 23,400 14,455
 Double, Stud x Stud
Gallons to Open 1.18 2.34 0.68 2.27 4.46 10.52 4.46
Gallons to Close 1.45 2.72 0.77 2.58 5.44 10.58 5.07
Closing Ratio 5.45:1 7.11:1 4.5:1 5.57:1 5.54:1 7.11:1 5.57:1

 

 


Copyright(c)Xi'an Landrill Oil Tools Co.,Ltd
Address:2-60402 Greenwich Business Suite, Jinye 2nd Road,
Hi-tech Development Zone, Xi'an China
USEFUL LINK